Using a Metered-Dose Inhaler With a Mask SpacerShake the inhaler and remove the cap: Step 1slide 1 of 5 slide 1 of 5, Shake the inhaler and remove the cap: Step 1, Shake the inhaler, and remove the inhaler cap. Check the
inhaler instructions to see if you need to prime your inhaler before you use
it. If it needs priming, follow the instructions on how to prime your
inhaler. Hold the inhaler upright and insert it into the spacer: Step 2slide 2 of 5 slide 2 of 5, Hold the inhaler upright and insert it into the spacer: Step 2, Hold the inhaler upright with the mouthpiece at the bottom,
and insert the inhaler into the mask spacer. Place the mask spacer: Step 3slide 3 of 5 slide 3 of 5, Place the mask spacer: Step 3, Place the mask spacer securely over your child's mouth and
nose, being sure to get a good seal. The mask must fit snugly, with no gaps
between the mask and the skin. Press down on the inhaler: Step 4slide 4 of 5 slide 4 of 5, Press down on the inhaler: Step 4, With the mask spacer in place, press down on the inhaler to
spray one puff of medicine into the spacer. Have your child breathe in the medicine: Step 5slide 5 of 5 slide 5 of 5, Have your child breathe in the medicine: Step 5, Keep the mask spacer in place and have your child
breathe in and out normally for about 20 seconds. This is how long it takes to
breathe in all the medicine. If your child needs another puff of
medicine, wait 30 to 60 seconds and repeat steps 4 and
5. ByHealthwise Staff
Primary Medical ReviewerJohn Pope, MD - Pediatrics
Specialist Medical ReviewerMartin J. Gabica, MD - Family Medicine Current as ofMarch 25, 2017 Current as of:
March 25, 2017 Author:
Healthwise Staff Medical Review:
John Pope, MD - Pediatrics & Martin J. Gabica, MD - Family Medicine |
|
|
|
|
|